Tcas II.V.7.0

Brogs · Post by **Brogs** » Sun Jul 31, 2005 8:42 am

"Hi I recently d/loaded Lee Hetheringtons Tcas Gauge and tried to install it in the RFP 742,It involves some editing of the Panel.cfg but I,m doing something wrong because I can,t get it to work! Has anyone installed this particular add on? and if so could they possibly post their amended Panel.cfg so that I can compare and see where my mistake is ! Many Thanks,& Safe Landings Mike"

cerwinvega · Post by **cerwinvega** » Sun Jul 31, 2005 9:22 am

"Mike, OK, just a few things to make sure of: Be sure these two files: TCAS2v7.dll TCAS2v7.ini are placed in your main FS9 folder. Also be sure to place the ILH_TCAS.gau file in your gauges folder, and check to be sure you have a copy of TrafficInfo.dll in your Modules folder. Now as far as panel integration, I do have a version of the TCAS that has the corner panel screws removed (just did this yesterday), but retains the brown border, on the TCAS display itself. Yes, it is still a different color that the main panel, but it does fit nicely this way. These are the numbers I use in the panel .cfg for my version: [Window00] // Main Panel for the Classic 747-200 file=Main.bmp size_mm=1024 position=1 visible=1 ident=Main_Panel .... .... gauge02=ILH_TCAS!IVSI, 302, 568, 95, 95, other:45 <---replace the original VSI ... ... ... gauge50=ILH_TCAS!Logic, 0, 0, 1, 1, trafficinfo:yes <---- you MUST add this gauge. And for the transponder: [Window02] // Radio Stack - Includes Radios, and Limit Panel file=Radios1.bmp size_mm=603,434 position=8 visible=0 ident=Radio_Stack_Panel ... ... gauge04=ILH_TCAS!Transponder, 202, 341, 202, 88 ... Note, the numbers for the display itself on the main panel may be just a tad off if using the original version with the screws in place. As busy as Lee has been lately, I'm not sure if I would be able to obtain permission form him to distribute my modification anytime soon. However, I do have an e-mail address, feel free to use it. [img]style_emoticons/<#EMO_DIR#>/wink.gif[/img] "

cerwinvega · Post by **cerwinvega** » Sun Jul 31, 2005 9:53 am

Brogs · Post by **Brogs** » Sun Jul 31, 2005 10:42 am

"Many thank,s Brian, I will try again and let you know what happens. Mike"