Posted: Fri Dec 30, 2005 5:31 pm
"Greetings, Attached is a simple utility program I wrote which may be useful for some of you. The program doesn't do much but display a few FS parameters which I sometimes need. Of particular interest may be the fuel flow in PPH (total and per engine). I noticed in some other posts comments about the Kg to pounds conversion for the analog guages. This program may save a little math for your fuel calculations. FSACRS displayed PPH in real-time which FSFK does not do. I missed this feature when I switched to FSFK so I updated this utility to display fuel flow. I notice on very long flights, fuel calculations are critical so having real-time FF is pretty handy. If there are any other parameters you would like to see displayed, let me know and I can update the program. The program is stand-alone and there is not a guage equivalent. I run it on a separate PC from FS which may not work for most of you. Of course, it needs FSUIPC or WideFS to work. Anyway, it's free and hopefully is a modest contribution to a very fine VA community. You can download the utility by clicking on the following link: <a href='http://www.myfantasyflight.com/programs/FSDisplay.zip' target='_blank'>FSDisplay.zip</a> Lee "